三亚附近想过夜电话联系

 contact us
  •  electromagnetic flowmeter
  •  Electromagnetic energy meter
  •  Vortex Flowmeter
Your current location: Shanghai Dongfeng pump valve factory > Product Center > Flowmeter > electromagnetic flowmeter >

Plug in flowmeter

  • [valve model]: DCLLJ-16
  • [diameter specification]: DN200—2000mm
  • [structural form]: Straight through
  • [valve body material]: cast steel
  • [nominal pressure]: 1.0Mpa、1.6Mpa
  • [applicable temperature]: 0-90°C
  • [application scope]: Industrial, agricultural, water conservancy, environmental protection sewage monitoring, urban water supply
Consult manufacturer Online Message
  •  Plug in flowmeter

Product overview

The plug-in electromagnetic flowmeter is used to measure the flow and total amount of various conductive liquids in various departments such as industry, agriculture, water conservancy, environmental protection sewage monitoring, urban water supply, etc. Compared with the pipeline flowmeter, the measurement of the plug-in electromagnetic flowmeter is not affected by the changes of fluid density, viscosity, temperature, pressure and conductivity. It adopts advanced excitation technology, low power consumption, stable zero point, strong anti-interference ability and good reliability. There is no additional pressure loss, the length of straight pipe is small, and the installation is relatively simple. The measurement range is wide, and the full range flow rate can be set continuously and arbitrarily in the range of 1.0 m / s-10.0 M / s. The output signal has a complete linear relationship with the flow rate (flow rate).

Product features:

1. The conversion display adopts 16 bit high performance microprocessor, 2 × 16 LCD display, convenient parameter setting and reliable programming

2. Two way measurement system, with three integrators installed in it, which can respectively display the total amount of positive flow, reverse flow and the difference between positive and negative flow

3. Digital output pulse display

4. Suitable for large diameter pipe, dn200-2000mm

There are many kinds of electrode materials and sensor body

6. Small size, light weight, convenient transportation and installation, continuous flow maintenance and disassembly can be realized

7. The price is cheap, and the larger the installation pipe diameter, the higher the performance price ratio

Flow range:

technical parameter

Product parameters:

1. Applicable flow pipe nominal diameter: dn200-2000mm.

2. Working pressure: ≤ 1.6Mpa

3. Working temperature: ≤ 70 ℃

4. Upper limit range of flow rate: continuously adjustable within 1-10m / s

5. Measurement accuracy: ± 2.5%

6. The conductivity of the measured medium is ≥ 50 μ s / cm.

7. Electrode materials: 304, 304L, 316, 316L, Hastelloy, titanium, etc

8. The maximum distance from the conversion display is ≤ 50m.

9. Cable: RVVP double core shielded cable or stt3200 four core three shielded cable.

10. For the function of conversion display, please refer to the operation manual of electromagnetic flowmeter of our company.

Quotation process

Valve price:

Due to the different requirements of order quantity, packaging and delivery mode, as well as the fluctuation of valve raw material price, the valve price will be greatly different. Therefore, the price of our products is not indicated on the website. Please understand.

If you select a valve product on this website, if you need to know the price or ask for relevant technical information, please contact us. We will reply immediately, and according to your requirements, we can select the right valve products for you, so that your purchasing process is easy and pleasant.

Quotation process:

1. Please fax the name (or product model) of the valve you selected, the required order quantity, packing requirements, delivery time, your company name, location and contact information of your company to 021-36311208 Or telephone number: 021-60547555。

2. After receiving the customer's purchase list, our company will provide customers with valve quotation "price list", model selection "valve model" and technical guidance as soon as possible.

3. Specific matters to be agreed: delivery time, special requirements, etc.

Ordering instructions

1、 If the customer has special requirements for the product, the following instructions shall be provided in the order contract:
(1) Valve body material (such as: plastic, cast steel, stainless steel...)
(2) Connection type (e.g. flange, thread, clamp...)
(3) Nominal diameter, pipe size
(4) Ambient temperature and pressure range
(5) Supply voltage, air pressure
(6) Nominal viscosity, pH, or pressure
2、 The company configures all kinds of driving devices according to the special requirements of customers. (electric control, pneumatic control)
3、 If the customer provides the determined valve type and model, the customer shall correctly explain the meaning and requirements of the valve model (for details, refer to the description of valve model preparation), and sign the contract under the condition that both parties understand and agree.
4、 In order to arrange the payment in time according to the total amount and quantity of the valve before and after the delivery, and inform the customer of the delivery time and quantity of the remaining 20%.
5、 After confirming the purchase, our company carries on the production in strict accordance with the delivery date. According to the different types and quantities of orders, the product processing cycle is generally 3 to 30 days, and the specific delivery time is subject to the contract. In order to ensure that the goods you ordered are in place in time, please order as early as possible.
6、 According to the needs of customers, our company provides network distribution services, delivering goods to the branches (offices) in major cities, and providing door-to-door delivery service. After the product acceptance, our company will provide after-sales service.
Last article: electromagnetic flowmeter Next: no more

Recommended products

Recommended Products

Related information

Related Information

Shanghai Dongfeng pump valve factory all rights reserved sales hotline: 130-5233-3444 HTML XML Address: 459 guchen Road, Baoshan District, Shanghai, Dongfeng Farm, Chongming District, Shanghai Hu ICP Bei 17014291-6